Whole House Well Water Filter Iron
Aeration System for Iron & Hydrogen Sulfide
The only way we sell whole house well water filters is to have your well water test results analyzed so we can recommend the right solution for your situation. This system and others shown are simply to indicate we have lots of well water solutions. Send us your water test results.
This whole house well water filter iron aeration system is a great choice for relatively low – but still levels of Iron & Hydrogen Sulfide you want to filter out. The main advantages of this system are the simplicity of design and no waste water, while highly effective.
Since this system is back-wash free, no Iron will be sent to your septic tank, which will extend the life of the septic system.
This unit is electricity-free, chemical-free & wastewater-free!
HOW IT WORKS
This Whole House Well Water Filter Iron system is a Venturi system that pulls oxygen into the water line as the water flows through. If your well’s Iron level is below 4 ppm & the pH is 6.8 or greater, this Venturi System will provide sufficient aeration. An aeration pump & flow kit are not required for Iron levels within those parameters.
The injection of air will knock the Iron out of solution into physical particles (turning Ferrous Iron into Ferric Iron) that are easily caught by a simple sediment filter. The 5 Micron post-sediment filter can easily catch the ferric iron that precipitates out of the water. The post-sediment filter will need to be replaced every 3-6 months depending on water use and the level of Iron.
If Hydrogen Sulfide is also present, this will be off gassed via the air release valve. If Hydrogen Sulfide or Methane is present, you must run a section of air duct to the outdoors to avoid these gasses from building up.
The main tank does not require replacement media.
REFILLS
Only the inexpensive post-filter needs replacing.
Click here to see the 5-micron post filter. (Get a few to have on hand. If added to a whole house system order, they ship for free.)
SPECS
Max Gallons per Minute: 10 gallons per minute
PSI Loss: <15
Pre-Filter Dimensions: 7-3/4″D x 14″H
Tank Dimensions: 10″D x 47″H
Reviews
There are no reviews yet.